| v10.27 |
Ring: special start/stop key for Handbell Manager
Challenge: disable sensors with Random nBells
and a few minor bug-fixes
|
| v10.26 |
PrefSetup: warn if Go/spacebar in use
|
| v10.25 |
Challenge:
new option Enter Bell by Place with Call Changes,
improved show/enable Apply/Close buttons
open in Log tab when faults active
|
| v10.24 |
Ring:
add Alt short-cut to menu Options.CoopTim
|
| v10.23 |
Ring Options:
increase Hand Bell default VoiceCalls delay to 135%
|
| v10.22 |
Ring:
enable switch off Co-Operative Timing while ringing
|
| v10.21 |
Challenge:
allow fault correction after Reveal,
opt1/2/3: force Sound.Bells, keep sound on Close if still ringing,
enable Esc.Pause in Opt2/3 text box
Generally:
improved CoopTim, Sensors MIDI and Multi-Bell interface, Test Sensor, Freestrike StrikeAs
Help:
improved ropesight tutorial
|
| v10.20 |
Choose:
improved touch listing after deletion,
add msg Unsaved Changes on choose method
Touch:
add msg DeletedTchName unavailable pending save,
prevent DeletedTchName on New
|
| v10.19 |
New
- TOUCH/COMPOSER+MM, RING:
optional start sequence
- ANALYSIS OPTIONS:
2/3/4 bell seq off back/front, 3/4 bell middle, 3/4 bell alternates, Minor chords, Row Names
Improved
- TOUCH EDITOR:
faster listing single method lead/event/call heads etc.,
improve msgs on switch build/CE/CP
- MULTI-METHOD EDITOR:
add convert single method touch to CallPos,
append/insert method ID on AddMethod,
warn RingFrom multi-row call crossing lead end
- TOUCH ANALYSIS:
allow with unlimited touch lengths,
show CallPos and enable CopyCP with single method (generic) in MMEditor,
add Intermediate (was Priory on 6),
extended Kings to 16,
improved Roller Coaster and Whittingtons,
add Near Misses, Combination Near Misses,
replace parts of Queens with Kings,
add 6857, 7586, 7658, 3468, 3478, 3578, 3748, 568, 7468, 5468, 1234 off the back,
add trailing tenors,
add 4321.. 8675.. off the front,
add odds and evens (parts of queens) +reversed,
all parts of Rounds/RevRounds, TC+RevRounds,
alternates (eg. 5.6.7.8, 8.7.6.5) middle and across hand+back,
all +transpositions, show short matches after long,
add distinct CRU count, add distinct row count,
add note when ATW/CP not available,
move InclTenor, CountOnce and FinalRounds to Options
save/restore Maximised current session
- COPY CALL POS:
init conductor to last working bell
- RING:
improved CoopTim when too early leading
- UPGRADE:
change ! to ^ in all pre-v10.19 touches for Start Sequence
- HELP:
add/amend page titles for search/list, sundry improvements
|
| v10.18 |
Options: remove ActivateOddStrk, move coopSpeed to timing options
Sound: reposition ActivateOddStrk
Display Settings: add context help to Display.Font buttons
Analysis: add ..568, ..7468, ..5468, +transpositions
Touches: improved validation: loading, Abbreviations, RingFrom, Mixed Stages
Help: improved CallPosEditor Defaults By Event No, FF Notation, RingFrom, calls display timing
|
| v10.16 |
Ring: improve ThatsAll short-cuts, add short-cuts for switch off ThatsAll
Challenge Log: add short-cuts for change speed
Precision Monitor: ignore auto-strike
Print: add Help to msg for non-fixed-width font
Help: note USB connections
|
| v10.15 |
Challenge:
Option 1: restore StartChange on End (after Call Changes),
Opt 2/3: add new Level: 2 bells without Lost,
Opt 3: add opt Close Last 5% + adjust scores,
Opt 2 Level 1/2: add opt Progressive Faults on all bells incl rounds/CC c/w opt starting bell/pos,
Opt 2: continue faults after All Found
Recording:
improved striking fault reporting,
don't ignore first 5ms fault,
add 'Band' to fault count with multiple imperfect bells
Status Bar:
add tool-tips to Recording, Call Pending and Challenge flags and Method and Touch boxes
|
| v10.14 |
Print Preview: add opt Undo last overwrite
|
| v10.12 |
Sensors: increase COM ports to 8 to incl USB converters
|
| v10.11 |
Challenge: Errors renamed Faults
|
| v10.10 |
Changes:
display/highlight ringer's bell in actual posn with strike-on-input (optional with multi-keys)
Animation:
add 'Call' to mat ToolTips
|
| v10.09 |
Listening Challenges: 8 add'l Stage Options (esp Rounds and Call Changes)
|
| v10.08 |
Improved
- SENSOR DIAGNOSTICS WITH FREE-STRIKE:
move display bottom left, add scrolling, show distinct Rise/Fall debounce times, maintain display after dialogs etc.
improved change mode and/or test bell after started ring/freestrike
- CO-OPERATIVE TIMING:
enable resume after delayed sensor input when not Alternate Hand/Back detection
- HELP:
improved Cooperative Speed and references to Precision Monitor
- GENERALLY:
plus a few bug-fixes and other improvements
|
| v10.07 |
Improved
- PRECISION MONITOR:
show latest hand+back error %,
improve alignment of alpha-Bells
- RING:
Target Place Hand/Back Detection:
allow earlier leading and later behind
- MULTI-METHOD COMPOSER:
improve detection of multi-part touches
|
| v10.05 |
New
- PRECISION MONITOR:
new visual striking monitor for Ringer's Bell
- AUTO-GO:
add opt Auto-Go after n strokes with sensors
Improved
- STRIKING MONITOR:
apply font size to Changes Striking Monitor
|
| v10.04 |
Challenges
- LISTENING CHALLENGES:
Option 2: retain max possible score on Exaggerate,
don't switch off RingOpts if only Stonky+AutoStrk with Options 2/3,
switch BlueBell if Option 2/3 with Option 1 or OutOfRange,
update StatusBar for Option 2/3
- LOG:
show box around previous responses,
show scores according to page type,
disable Apply on Log/Score tabs if only Option 1,
truncate multiple bells and append ...
- RANDOM STAGES:
deselect Random Stages on open,
add warning with Option 1,
add/amend Log header
- GENERAL IMPROVEMENTS:
disable Ok when same as Close or inappropriate from Wizard, adjust Default,
show changed flag with Degree% and ShowWarnings,
improved msg Allow Covers,
don't ask Restore if only BlueBell and orig out of range
Co-operative Timing
- improved Co-operative Timing and Co-operative Speed
|
| v10.03 |
Listening Challenges
- NEW SCORING FOR OPTIONS 2/3: show actual and maximum possible
- NEW SCORE TAB: show actual, maximum, n games, average and success rate
- IMPROVEMENTS:
Option 1 Level 4 now method with cover if Options 2/3,
Options 2/3: current Log entries list now scrollable and only directly editable,
Options 2/3 Level 4: now Auto-calls Go and allows Dodge
Challenges Generally
- ADVANCED AND GENERALLY:
Advanced error degrees: +/-5% exclusion now +/-8% if end of range within +/-10%,
all AutoSelect modes: prevent Dodge with PlainHunt,
if poss avoid Up/Down/Dodge/Lead for covering tenors,
warn if Dodge+PlainHunt, Tenors+Up/Down/Dodge/Lead, Lost+no method and not AllowCovers,
Options 1/4: enable Escape=Pause in Entries box
|
| v10.02 |
Listening Challenges
- OPTION 3: hide fault count if < 2 Degree types,
don't reset log entry controls on correct entry,
- OPTION 2: deactivate fault when all found,
- OPTIONS 2/3: randomise faults with lost place,
don't StopRinging+msg on Apply Opt2/3 when not already StartNBells or active,
- GENERALLY:
improve restore RingOptions after Opt1,
warn abandon active log page on opt RenewLog,
improved error handling
|
| v10.01 |
New Listening Challenges
- incl. Stages / Number of Bells and/or Fault Diagnosis / Adjustment,
with added Difficulty levels,
log fault count,
log header page when changing Options
Challenges Generally
- IMPROVED ADVANCED SETTINGS:
allow cancel if warn AutoStrike on start ringing,
indicate EveryStroke and Randomise selected with Lost/Swap,
enable striking fault on ringer's bell(s) when not StrikeOnInput,
improve validation of random and zero Degree%Range
- THE BAND:
VariableSpeed applies when Enabled as well as WhenDisturbed,
RandomStages: add StartIn option PlainHunt, add opt exclusively even or odd+cover,
new opt to force show Striking Monitor
- GENERALLY:
disable inappropriate RingMenu items,
always change stage with RandomStages,
add option DisableFaults+Close
- LOG:
keep current fault hidden until Reveal or Stop,
show stage+nBells with RandomStages,
don't show StartRow if only RandomStages,
enable Delete current Log Page when fault stops
|
| v10.00 |
Beltower and Generally
- WIN-VISTA: amended default file locations for Windows Vista,
adjust form sizes for Vista incl docked
- FOLDERS: segregate WAV files by Bell/Call/Method,
add new DataPath folders for Recordings and User WAV files,
display shortened UserName\Documents paths,
improve default folder selection, include Documents folder,
improve file access validation incl CD/network,
add relative file links in DAT/BML for Documents
- SHORT-CUTS: add opt create short cuts on DeskTop and StartMenu
for moved/renamed DAT/BML files
- PRINT TEMPLATES: MostRecent template image now unique per DAT file,
new PrnTmplt folder location if Vista+ProgramFiles
- SOUND SETTINGS: enhanced highlight current bells
- VOICES/SOUND SETTINGS: improve display of file names
- GENERALLY: improved error messages, bug-fixes in all areas
Help
- WIN-VISTA: convert to HTML c/w Contents,Index,Search,
convert www text to weblinks,
add header pages to Choose, Changes, Anim, CCPEdit, Analysis and MthTchUpdate
- FILES: updated/improved locations, search order and short-cuts
- ROLL-UPS: add LBR and CRU to roll-ups,
general improvements to contents and index
- VOICES: separate general and method pages
Upgrade Wizard
- IMPORT: add import from old machine/structure,
list export files,
force upgrade pre-V6 Lib if importing
- RESTRUCTURE: ask old+new file locations,
add opt copy linked WAV+Tmplt files,
ask rename/keep/switch,
allow overwrite new empty DAT file,
on exit ask delete copied/redundant files, prompt copy other files,
save Import.Log
- UPGRADE: update WAV refs to defaults in DAT/BML/BSR,
ask reassign missing files to defaults,
ask remove PrnTmplt if wrongly found in app.path
Installation
- FOLDERS: add user selectable data folder,
improve path selection and msgs
- UPGRADE: rename BML/BCL Belt_Old.* instead of *.BAK, don't overwrite DAT,
always prompt upgrade on exit in case not detected,
allow user flag upgrade
- MICROSIRIL: include microSIRIL with main install, don't ask if overwrite
- PRINT TEMPLATES: add msg must remove PrnTmplt if wrongly found in app.path,
save new config file for datapath and pre-v7.18.upgrade flag
- SHORT-CUTS: create both Beltower and Upgrade shortcuts on desktop, add DAT param
- UN-INSTALL: improve uninstall
- DATA FILES: adjust BML/BSR links to WAVMethod/Call, remove DAT link to BML
- INSTALL: HTML Help where IE3+ exists,
sort/group files by destination
|
BELTOWER